Orders placed by noon CST on Wednesday typically ship the following week unless reprints are needed.
You may upload your print-ready images (transparent PNG [with no background) and 300 DPI] or any KBD uploaded images to the gang sheet builder. Watermarks over KBD images WILL NOT PRINT ON YOUR FILES!
Your prints will be have the watermark shown on screen removed for our images.
Make sure to leave room between each image for cutting. KB Designs is not responsible for images submitted which do not meet print standards. If you upload an image with a background or below 300 DPI/low resolution, it WILL print accordingly and no refund will be due to such. Please note that designs are printed in DTF format which may slightly alter the final colors.
By uploading files, you confirm that you own the print rights to the image and release KB Designs from all liability.
**YOU MUST USE A HEAT PRESS WHEN APPLYING THESE TRANSFERS**
- Prepress garment for 15-20 seconds
- Press at 300-325 Degrees F for 15-20 seconds
- 60 PSI ~ heavy pressure
- Warm (or cool) peel evenly from corner and discard transfer film
- Cover with Teflon sheet and repress 15-20 seconds
*Each heat press can vary with time and temp. Be familiar with your press and how it runs. You may need to slightly adjust them up or down as well as press time. These are manufacturer recommendations only.*
*** KB Designs is not liable when the transfer is applied improperly or once pressed***