Full Color DTF - UP TO 8 LETTERS - order additional images for multipole names/words or more than 8 letters
TAT up to 14 business days
Do not order with other non-DTF items. No discounts apply to this custom item.
**YOU MUST USE A HEAT PRESS WHEN APPLYING THESE TRANSFERS**
YOU MUST USE A HEAT PRESS
Temperature: 325-350 Degrees*
Pre-press garment 3 seconds
Time: 15-20 Seconds*
60 PSI ~ HEAVY pressure
- Immediately after peeling, recover with transfer sheet and press for an additional 5-7 seconds.
*Each heat press can vary with time and temp. Be familiar with your press and how it runs. You may need to slightly adjust them up or down as well as press time. These are manufacturer recommendations only.*
Recommended blank to use with this transfer:
-100% Cotton or Polyester T-shirt
-Cotton Tote Bags
-Poly/Cotton Pillow Covers
Blanks that will NOT work on:
-100% Polyester, wooden or ceramic blanks (mugs, plates, etc), metal (tumblers, glasses, etc), and glass Items
What is direct to film? DTF inks can be printed on virtually any surface that can withstand the heat required to cure the ink and is porous enough to permit good ink penetration. They inks do not color the fibers like a dye. Instead, the ink wraps around the fibers and makes a mechanical bond with the fabric. For this reason, they will not adhere to non-porous substrates such as plastic, metal, and glass.
*** KB Designs is not liable when the transfer is applied improperly. Heavy pressure is a high as possible and if using a clamp press, it must be closed. ***