** YOU MUST USE A HEAT PRESS**
This is our classic screen print formula which is as close to a direct screen print as possible. This formula is consistent across different garment colors.
You as a layering screen or scratch to create DIY screen print confetti!
Up to 12"
- YOU MUST USE A HEAT PRESS
- Pre-press for 3 seconds
- Temperature: 325 Degrees*
- Time: 7-10 Seconds*
- 60 PSI ~ HEAVY pressure
- HOT PEEL - quickly and evenly from the corner
*Each heat press can vary with time and temp. Be familiar with your press and how it runs. You may need to slightly adjust them up or down as well as press time. These are manufacturer recommendations only.*
Recommended blank to use with this transfer:
-100% Cotton or Polyester T-shirt
-Cotton Tote Bags
-Poly/Cotton Pillow Covers
Blanks that will NOT work on:
-Wooden, Ceramic blanks (mugs, plates, etc), Metal (tumblers, glasses, etc), and Glass Items
What is plastisol screen print ink? Plastisol inks can be printed on virtually any surface that can withstand the heat required to cure the ink and is porous enough to permit good ink penetration. Plastisol inks do not color the fibers like a dye. Instead, the ink wraps around the fibers and makes a mechanical bond with the fabric. For this reason, they will not adhere to non-porous substrates such as plastic, metal, and glass. They also will not adhere well to woven waterproof nylon material. I DO offer a screen print formula for those garments, so please message for a quote.
*** KB Designs is not liable when the transfer is applied improperly***